- 3 piece mold registration
- Time to Make it BIG
- Wood Relief....
- welding corten..
- Making a Plaster Mold
- painting epoxy resin problem
- Classes in Chicago for Large Scale Exterior Sculpture?
- ceramic shell binders?
- Foam suppliers
- problems with permalac?
- Glue Bonding Concrete Block?
- Question on Polishing Concrete
- Foam to fill/ strengthen/ bond large ceramic
- dyeing wood
- manganese bronze source
- Resin bronze
- Long lasting polish for Hydrocal
- Fiberglass mother molds
- latex under silicon and water clay fences
- acetylene torch outfits
- resin reproductions
- Making a Wax Figure w/ color and fabric
- Hydroshrink, Reducit and Reducit 2 problems
- Welding my own bronzes?
- help with "free casting"
- some metal help please
- Casting in the UK...
- ratio needed-clear matt varnish mixed with white spirit for sealing/coating plaster
- Chrome plated bronze
- dyes for plaster? +waste molds
- bronze dealers in Boston?
- bonded sandcasting?
- plaster investment-- couple questions
- making a furnace for bronze
- Repairing and finishing a plaster cast
- need help with resin/metal powder casts
- Synthetic plaster?
- Bonded Marble
- Theming with Spray Polyurethane Foam SPF
- Finish for Bronzes besides traditional wax
- Epoxy resin with filler, cabosill and wood panels?
- New York City Metal Sellers?
- Tips on SEALING / coating metal to protect it from oxidation?
- Looking for clay sprayer
- Texturing.
- Sand Casting boxes
- steel carving
- Ferrocement sculpture & Space-age mud and wattle
- Bronze casts or composites
- Alternative to laser cutting acrylic?
- "patina" on plaster
- white patina on bronze
- What sort of plastina clay should I use for figurative sculpture
- Looking for copper scrap
- Sculpture Material CHEAP
- degassing aluminum
- Making a floating sculpture
- diy gesso
- Forton?
- Materials to purchase
- Learning to mold
- talix
- CLAY FOR MOULDS
- Protecting Stainless Sculpture
- Need help finishing a marble piece
- How to mold clothing
- Laser Cutting Plate Steel
- how to paint fibreglass to resemble metal?
- Refinish Ducks Unlimited Deer Sculpture
- faux mable tile
- welding dissimilure metals
- molding clothing/stiffen the clothing?
- Transferring sketches onto wood or metal?
- resin problems
- Chicken wire twisting, bending, cutting
- paper mache molds
- plating at home
- Advice for building concrete sculpture
- Marble Dust
- basic stuff
- titanium
- cast in bondo, please help!!
- Casting paintable parts
- Shrinkage math
- Help with plaster casting
- Lacquer or Urethane finish
- need to weld bronze tusks onto bronze elephant
- Wood Sculpture Cradle
- Adventures with my new furnace
- Making a prop bow, not sure which wood to use
- Supply source?
- Colouring epoxy resin/fibreglass with acrylics?
- bronze composite and cabosil, help
- terracota
- Request for ideas for fiberglass tentacles
- glue? resin? plaster? HELP!
- smelting
- I have some bronze powder I dont need anymore, anyone interested?
- Welding a Stainless backing on Mild Steel?
- Epoxy durability?
- Miller Student Package $25.00
- Welding Steel Balls! Advice Needed Please!
- Making electropolish unit
- winterstone icing and fiberglass mesh cheap
- waste mold woes :-(
- Anyone into Flameworking / Lampworking ?
- Foam Problems.
- Mould of a lions head wanted
- Help with water based clay
- Stainless + Mild Steel =?
- casting with hard setting "fixall" putty
- cube and sphere
- Need to make molds to pour carving wax
- Plaster Help
- how to safely pack waxes for shipping to foundry
- Chemical etchings and resist HELP
- armature pipe
- Burning Sculpture - Charred Wood
- Sculpting a Comic Book Style figure
- Marble Dust and White Cement
- Videos
- Fixing herculite plaster parts together Advice?
- please help with dilemma
- figurative sculpting in bronze/help
- Staining Steel
- Rotary Hammer Drill question
- armatures & mold making
- Newspaper, masking tape, good stuff
- Engineering Structures
- Polytek vs Smooth-on
- Noob question/plasticene casting.
- Plaster Question - URGENT
- Concrete forms - conical?
- My Project.
- ESAB vs. Miller vs. Lincoln Electric
- Joining Steel & other metals
- Reducing corrosion in painted steel sculptures?
- Plaster hardener with stone fillers
- Materials that can be poured into a mold
- Ok so now on to casting plaster...
- Pure Pigment, Contructed Form
- Modeling Wax
- Self Drying Clay: How To Fix Broken Pieces
- Big butt bowls
- New, Trow and Holden hammer questions.
- Soapstone dust....an idea
- Pinholes with Hempadur
- Bending large acryllic sheets
- Rebound 25/figurine project advice?
- Soapstone Sculpture Lost Colour
- Searching for the perfect material
- Finishing Advice
- wood guys please help
- new to sculpture.net, some sculpting questions
- Foam Sculpture and Fiberglass
- New to fiberglass
- Filled resin casting?
- Best sculpting material for helmet
- ? Stone Finishes?
- Ferrule-crimping Hosers
- A Great Source For Alabaster
- arc gouging torch
- Victor vs. Smith prices?
- Affixing plaster to marble - what to use?
- Shapeways rapid prototyping
- How can u get the deep/dark blue glazed paint effect on plant pots?
- Ideas on where to start a sculpting/molding project for iPhone
- Hand me down kilns - now what?!
- New to foam sculpting - need advice
- Cement casting in Moulage Mold
- Marble/Granite polishing
- Rolling Tube Steel
- Moulage moldmaking
- Can you identify the material of this piece?
- Would like some tips on what medium to use.
- Asbestos in my soapstone and dust collection questions
- Need Advice with scultping a Styrofoam Head
- i need help with hard coat-shell on EPS!!!
- New MOULAGE Experiment
- Painting hydrocal
- Red Patina Cymbal and its secret
- Mushroom project..i need your ideas/opinions!!!
- Latex question
- rotocasting
- Symmetry
- Setting up a kiln
- Glazing on Limestone
- Alternatives to plaster?
- Cor ten welding
- Best Foredom kit and where to buy it?
- Creating molds from bisqueware?
- Smoothing surface on large clay model
- Need help with Mold for Ice
- newbie with a question
- Welding, how many courses should one do?
- What finish would be best for this?
- from model to sculpture with stick weld. (beginner)
- Melting crushed glass
- Fibreglass over Styrofoam
- patinas for galvanised steel
- Sculpting Fluffy Fur
- glass slumping mold making support
- Bronze finishing
- Silicone Paint?
- flexible-foam/polyresin appliques
- Wooden Globe?
- Stone glue
- Making Foam Tiles for Kid's Playhouse?
- Removing Zinc Coating
- How to mig without burning up those tips
- A few thoughts about casting wax(-like) materials
- mixing metals
- Painting stainless steel
- using vegtable oil as a release agent?
- Need help- large figurative work - how?
- releasing wax from plaster
- casting mannequin parts
- Spot Welders ?
- working with powder pigment - advice please
- beginner level patinas for bronze
- acoustic tile
- how to make a 2 part hollow cast with silicione
- plaster strength?
- stone etching tools - which and where from??
- Mermaid tail color and coating
- Patching silicone molds
- Paper armature
- Cutting hair in stone
- Mold design - advice please
- reconstituted stone
- sealer/protection coat for plaster statue
- Where to get anatomical faces for sculpting?
- Plant dye for stone
- Advice needed for weird sculpture
- Metal fabrication trade shows 2009
- wood finishes
- Stainless
- How to mount a sculpture on a wood base
- Butt Costume
- how hot to have plaster investment to pour
- Newbie here, need info on wind sculptures
- Large Styrofoam Blocks
- Steel refinish advice
- color stains for plastic/plexiglass-sources
- Computer program?
- Best power tool attachments
- Toy materials
- Dust Management
- Has anyone used Metalguard Ultra?
- Working Stainless Steel Dangers